Epiphan Vga2usb PRO VGA Video Frame Grabber, 32mb RAM

Description

Get loss-less frame grabbing at 30 fps at 2048 x 2048 resolutions with the VGA2USB PRO in most applications. <p> Epiphan's secret to such high performance loss-less frame grabbing is their 32 MB of onboard RAM with normal utilization of USB bandwidth. FPGA and the most advanced Philips VGA ADC allows it to aquire frames with the resolution of up to 2048 x 2048.

Key Features

• Interface: Supports USB 2.0 and USB 1.1 buses. Performance of the VGA2USB PRO device will be significantly downgraded, however, when connected to a USB 1.1 bus
• Connectors: One VGA D type connector, One USB mini B type connector, One 5V DC 1.3 mm power supply connector
• VGA Signaling: Supports the following signaling: R,G,B plus separate HSYNC and VSYNC signals; R,G,B plus CSYNC signal; R,G,B with Sync-On-Green synchronization
• VGA Modes: HSYNC rate is between 15 KHz and 150 KHz; Pixel rate is between 12 MPixel/s and 270 MPixel/s for noninterlaced grab; Pixel rate is between 270 MPixel/s and 532 MPixel/s for two consequent frame interlaced grab
• Color Resolution: RGB24 (8:8:8); RGB16 (5:6:5); RGB8 (2:3:3); YUY2; UYUV